Solid Wood Floor Installation

To set up a solid wood floor at home approach your sub-floor prepared. You are doing this by making sure it is sound and level, the moisture level is right and the area temperature is approximately the same level in which you are going to are in. Likewise all materials must be on site one week before installation to climatize the wood. hardwood flooring refinishing Houston

You choose the design, colour and variety you like from trials given and then you place your order. You will discover different species available including Oak, European oak, Leading oak, Rustic oak, Pine, Merbau, Iroko, Rhodesian teak wood, Maple, teak, ebony, wenge. Make sure your floor comes end matched and is kiln dried to less than 10% water. 

When fitting a floor on the wood floor basic the sub- floor can be boarded out with ply. Generally upstairs you don’t have problems with the moisture level but downstairs always check for this to be sure to have an air flow from the front to back again of your property and that your air flow stones are cleaned out and not blocked.

Cut away your door frames first by by using a saw put on top of the flooring material facing the frame and saw the frame out so the floor fits snugly underneath. You may need to mill it out manually. Upon wood floors lay the flooring tongue side in your direction and secure down with an apertura nailer every 400mm. Upon a concrete floor use a sausage adhesive like Silka and lay a 10ml by 10ml bead 400mm apart in collection like batons.